Airtex E2298S Fuel Pump Sender Assembly

You looking to find the "Airtex E2298S Fuel Pump Sender Assembly" Good news! You can purchase Airtex E2298S Fuel Pump Sender Assembly with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $143.41    

Product Feature

• Every single pump is 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Advanced rust-inhibiting finish for long-lasting durability
• High-performance pump section assembly provides superior performance
• Leading-edge inlet design to reduce friction and increase performance

Product Description

Airtex fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Airtex E2298S Fuel Pump Sender Assembly Review

The part was installed and my 2001 expedition is running better , I also replaced the fuel filter I decided to let a professional install it , the task is to big for doing at home.

Most of the consumer Reviews tell that the "Airtex E2298S Fuel Pump Sender Assembly" are high quality item. You can read each testimony from consumers to find out cons and pros from Airtex E2298S Fuel Pump Sender Assembly ...

EBC Brakes GD7076 3GD Series Dimpled and Slotted Sport Rotor

You looking to find the "EBC Brakes GD7076 3GD Series Dimpled and Slotted Sport Rotor" Good news! You can purchase EBC Brakes GD7076 3GD Series Dimpled and Slotted Sport Rotor with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $157.38 $146.84   

Product Feature

• Wide slots help brakes run up to 200 degrees cooler
• Reduces brake fade under load and at speed
• Removes dirt dust and debris from braking zone
• Great for Truck and SUV, towing etc for sport sedan use
• Anodized for protection gold for imports or black for domestics

Product Description

The latest in sport rotors features wide aperture slots that draw cool air into the braking contact area and reduce temperatures preventing brake fade. Dimple drilling avoids stress cracks and the new gold anodized EBC finish provides great looks whilst preventing corrosion. EBC sport rotors now feature reduced 3 slot venting which provides slightly less air noise under heavy braking whilst still maintaining the benefits of cooler running with the full width slot design. The design of these rotors means that some wind noise is observed and if drivers feel they would find this offensive they are advised to select the quieter USR Ultimax series or the EBC plain rotor. Another great feature of slotted rotors is the way they maintain flat and parallel pad wear and avoid the record grooves or galling common with non-slotted rotors. This improves pad contact and braking throughout the life of the rotor and pad set.

EBC Brakes GD7076 3GD Series Dimpled and Slotted Sport Rotor Review

I swapped out the front rotors on my wife's Ford Escape with these, it was only time to change the pads but I figured I'd upgrade the discs as well. They look great, painted the calipers red while I had them loose. For the price it would be crazy not to buy a set like this, they are way cooler then the factory discs. Make sure to follow the recommended break in instructions that come with the discs(no hard breaking for the first 1000 mi. unless it's an emergency). They grab better and better everyday as the pads and discs wear a little and make good surface contact.

Most of the consumer Reviews tell that the "EBC Brakes GD7076 3GD Series Dimpled and Slotted Sport Rotor" are high quality item. You can read each testimony from consumers to find out cons and pros from EBC Brakes GD7076 3GD Series Dimpled and Slotted Sport Rotor ...

Dutton-Lainson DLB2500A Brake Winch 2500 lb

You looking to find the "Dutton-Lainson DLB2500A Brake Winch 2500 lb" Good news! You can purchase Dutton-Lainson DLB2500A Brake Winch 2500 lb with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $148.98    

Product Feature

• 2500 lb capacity
• Brake winch safety and solid construction at a more economical price than model B2503
• 175 lb minimum load for brake to operate properly
• TUFFPLATE zinc finish provides protection against rust
• 9-3/8" handle with ergonomic molded grip

Product Description

Many of the same design features as popular D-L trailer winches, but with some important differences. In a nutshell, these winches can be used for vertical ifting, whereas trailer winches are for horizontal pulling only. Brake winches have no ratchet, so they're always "in gear"..... there is no neutral, or free-wheel mode. A friction braking system is built in, so the load is always locked in place any time the handle is released.

Dutton-Lainson DLB2500A Brake Winch 2500 lb Review

Purchased this to use with my US Tower HDX555. I will be using it with the raising fixture. The gearing ratio is perfect for the task and the swap out from the existing winch was a snap.

Most of the consumer Reviews tell that the "Dutton-Lainson DLB2500A Brake Winch 2500 lb" are high quality item. You can read each testimony from consumers to find out cons and pros from Dutton-Lainson DLB2500A Brake Winch 2500 lb ...

New Rand MIG Welder 130F/120 amp/110 Volt/flux core wire

You looking to find the "New Rand MIG Welder 130F/120 amp/110 Volt/flux core wire" Good news! You can purchase New Rand MIG Welder 130F/120 amp/110 Volt/flux core wire with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.95   

Product Feature

• Brand new RAND Powerweld MIG-130F flux core MIG welder.
• Welds up to 1/4"+ thick steel, stainless steel or chrome moly.
• Plugs into a standard 120V household style outlet.
• Includes a 1 pound spool of wire to get you started. (Use with 1mm tip included)

Product Description

This new Rand Powerweld MIG-130F Welder is so portable, it is perfect for the home shop or carry it in your vehicle! This portable welder is ideal for welding steel and stainless steel up to 1/4"+ thick. It plugs into a standard household 120V electrical outlet. You can adjust the welding amperage from 60 to 120 amps. With the flux-cored wire, no welding gas is required because the wire is self-shielding. Please note: We have sold hundreds of these units and have had nothing but great responses to their performance! Check out the detailed features that follow: � �Brand new RAND Powerweld MIG-130F flux core MIG welder. � �Welds up to 1/4"+ thick steel, stainless steel or chrome moly. �Plugs into a 120V household style outlet. Includes a 1 pound spool of wire to get you started. (Note: To use this included wire, make sure that the included 1.0mm tip is installed in the torch handle.) � Uses 4" diameter spools of flux cored wire, so sheilding gas is not used which saves time and hassle. �Wire diameter is .9mm - 1mm (.035" - .039"). ��Includes tips for .9mm and 1.0mm wire. (Note: To use this included wire, make sure that the included 1.0mm tip is installed in the torch handle.) � Easily switch between 60 amps (35% duty cycle) and 120 amps (10% duty cycle), just by flipping the switch labeled 1 and 2 on the front of the machine. •The wire feed rate has two speed ranges controled by the min/max switch on the front, and the feed rate can be fine tuned by just turning the feed rate dial. � The included MIG Torch handle has an easy to use trigger, and has an overall length including cord of 7'-2". •Includes ground clamp and cord with an overall length of 6'-6". •The welder itself measures approximately 13.25"L x 14"H x 7.25"W � Includes brush/chipping hammr. �Includes compact handheld mask for quick tack welding. � This includes a starter spool of self-sheilded flux cored wire. It is 1 pound of 1mm diameter, Type E71T-1 wire.

New Rand MIG Welder 130F/120 amp/110 Volt/flux core wire Review

The item worked like any other I have used. It got here in a timely manner. was suppose to come with a pound fo .30 wire. didn't the people I was in contact with took care of it instantly. The wire I got however was a 1.0 size open roll. No tip for it so it this would have been my first welder I would have had to get tips for the wire. The welder like I said works well. Once dialing in the feed speed I could run welds as long as I needed with no issue at all. Make sure the wire to your outlet is heavey enought to take the amps. along with the breaker, and outlet it''s self.

Most of the consumer Reviews tell that the "New Rand MIG Welder 130F/120 amp/110 Volt/flux core wire" are high quality item. You can read each testimony from consumers to find out cons and pros from New Rand MIG Welder 130F/120 amp/110 Volt/flux core wire ...

Dee Zee DZ370323 3" Round Stainless Steel Tube Steps

You looking to find the "Dee Zee DZ370323 3" Round Stainless Steel Tube Steps" Good news! You can purchase Dee Zee DZ370323 3" Round Stainless Steel Tube Steps with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $185.60 $161.17   

Product Feature

• Stainless Steel Construction Polished To A Brilliant Shine
• Molded Plastic Step Pads Provide Secure Footing
• Custom Fit Application Ensures Quick And Easy Installation
• 90 Degree Bends Hide Rust Inhibiting Powder Coated Bracing
• Limited-Lifetime Warranty

Product Description

Dee Zee Nerf Steps - A tubular side step for your vehicle. Constructed of polished stainless steel. 3" round design. Molded plastic step pads provide non-skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong. Custom Fit - no drilling required.

Dee Zee DZ370323 3" Round Stainless Steel Tube Steps Review

It was ok, but the part didnt quite fit my 2012 f250. I had to do some drilling to get it to fit.

Most of the consumer Reviews tell that the "Dee Zee DZ370323 3" Round Stainless Steel Tube Steps" are high quality item. You can read each testimony from consumers to find out cons and pros from Dee Zee DZ370323 3" Round Stainless Steel Tube Steps ...

Delkevic US KIT2508 Honda CBR600 F4 9" Oval Stainless Steel Silencer

You looking to find the "Delkevic US KIT2508 Honda CBR600 F4 9" Oval Stainless Steel Silencer" Good news! You can purchase Delkevic US KIT2508 Honda CBR600 F4 9" Oval Stainless Steel Silencer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.95    

Product Feature

• Delkevic silencers are handcrafted from the highest quality materials to enhance your motorcycle in both performance and looks. We guarantee to improve your riding experience at an unbeatable price.
• Delkevic SS70 9" oval silencers are made from high grade 304 Stainless Steel with the same care and attention to detail we apply to all Delkevic silencers. They have a big 2 3/4 inch (70mm) outlet and are short, open, crisp and LOUD with the baffle removed, but with neighborhood friendly "db" levels with the baffle in.
• This is a 5 �piece set �- �Delkevic silencer, link pipe, strap, and clamps.
• The weight of the silencer is� 3.04� lb / 1.380� kg.
• All Delkevic silencers have a 12-Month Guarantee. No rejetting or remapping is required after fitment however we always recommend a dyno test after fitting replacement parts to your motorcycle.

Product Description

Honda CBR600 1999-2000

Delkevic US KIT2508 Honda CBR600 F4 9" Oval Stainless Steel Silencer Review

If you're on a budget then this is the one for you. I bought this for my stunt bike and ended up getting one for my daily bike. Awesome exhaust note. Haven't checked for power gains yet, but I definetly recommend delkevic! Their website states that the 9" shorty does not come with a baffle insert but it does.

Most of the consumer Reviews tell that the "Delkevic US KIT2508 Honda CBR600 F4 9" Oval Stainless Steel Silencer" are high quality item. You can read each testimony from consumers to find out cons and pros from Delkevic US KIT2508 Honda CBR600 F4 9" Oval Stainless Steel Silencer ...

Harley Davidson '04-up Sportster Detachable Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack Combo

You looking to find the "Harley Davidson '04-up Sportster Detachable Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack Combo" Good news! You can purchase Harley Davidson '04-up Sportster Detachable Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack Combo with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $161.00   

Product Feature

• Fits '04-later Sportster XL models.
• Easy on-and off detachable convenience.
• Requires separate purchase of Docking Hardware Kit.hardware. - NOTE: ROUND PAD MAY BE SUBSTITUTED FOR SQUARE PAD
• Sissy bar upright: 8-3/4" (outside to outside), Mounting holes distance: 7-1/2" (center to center), Tall 14.5" high sissy bar upright made from 14 x 14mm heavy duty metal.
• Triple chrome plating, 19" high overall height, Comfortable and plush Passenger square backrest pad is 8"x8", Blank backrest pad metal available upon request.

Product Description

Excellent quality detachable Harley Davidson '04-up Sportster Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack for easy on / easy off convenience.

Harley Davidson '04-up Sportster Detachable Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack Combo Review

this was great made great heavy looks great made great it fit my harley 1200 c great if you are looking for a back rest luggage rack get this one

Most of the consumer Reviews tell that the "Harley Davidson '04-up Sportster Detachable Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack Combo" are high quality item. You can read each testimony from consumers to find out cons and pros from Harley Davidson '04-up Sportster Detachable Sissy Bar, Backrest Pad & 9" X 6" Luggage Rack Combo ...